
Home / Services / AC Installation
Air Conditioner Installation in Westchester NY, Sized for Your Home
Adding central air to a house that never had it, or swapping out a system that has worn out, is a project worth planning carefully. We start with your house, not a catalog, so the new equipment matches the rooms, the ducts and the way you live.
What does air conditioner installation in Westchester NY involve?
Air conditioner installation in Westchester NY starts with a home visit to size the system and check whether existing ductwork can carry the air. From there you get a written plan and estimate, then install day covers setting the outdoor and indoor equipment, connecting lines and wiring, and testing everything. Homes without ducts may be better served by a ductless system, and we will tell you if that is the case.
From first visit to first cool day
How a new AC installation is planned and done
Most of the work in a good installation happens before the equipment ever shows up.
Walk the house
Your technician looks at room sizes, windows, sun exposure, the attic or basement and any existing ducts.
Size and plan
The system is sized for the house, and the plan covers where each piece goes and how air reaches each room.
Written estimate
You receive a clear estimate describing the equipment, duct work if any, and what install day includes.
Install and commission
Equipment is set, connected and started, then tested and explained to you before the job is called done.

Is it time?
When AC replacement in Westchester makes sense
Not every struggling air conditioner needs to be replaced. These are the situations where a new system is usually worth discussing.
- Repairs keep coming back summer after summer
- The system can no longer keep upstairs rooms comfortable
- A major part like the compressor has failed on an older unit
- The house has no central air and portable cooling is not enough
- You finished a basement or added rooms the old system never served
- The existing equipment is mismatched or was undersized from the start

AC Installation
Central air for older homes without ducts
Many Westchester houses were built long before central air was common. A 1920s Tudor in Bronxville or a colonial in Larchmont may heat with a boiler and radiators and have no ductwork at all. Adding central air to a house like that is possible, but it takes planning: an air handler usually goes in the attic, ducts are routed through closets, attic space or chases, and supply vents are placed in ceilings or high on walls.
Before you commit, your technician will look honestly at what the house allows. Sometimes there is plenty of attic room and the job is straightforward. Sometimes the second floor can be served from the attic but the first floor would need ducts that are hard to hide. In those cases a ductless system, or a mix of central air upstairs and ductless units downstairs, may make more sense. You will hear the trade-offs before anything is ordered. It is also worth thinking about noise and looks: where the outdoor unit sits, how close it is to a bedroom window or a neighbor’s patio, and whether ceiling vents will suit the style of an older room.
Good to know
Why sizing and ductwork readiness matter
An oversized air conditioner cools the air quickly, shuts off, and starts again a few minutes later. It never runs long enough to pull moisture out of the air, so the house feels cool but clammy. An undersized system runs nonstop on hot days and still falls behind. Proper sizing looks at the actual house, including insulated or drafty areas, the number and direction of windows and how many floors the air has to reach.
If you are replacing an existing system, the ducts deserve a look too. Ducts that were sized for an older, smaller unit, or that leak into an unconditioned attic or crawl space, can hold back a brand new system. Your technician will check duct size, condition and return air before recommending equipment, and will tell you if sealing, repair or added runs should be part of the job.
Install day itself is usually predictable once the planning is done. Expect the old equipment to be removed if there is one, the new outdoor unit set on a level pad, the indoor coil or air handler connected, the lines and wiring run and the system tested in cooling mode. Before leaving, your technician shows you the thermostat settings and the filter location, so you know how to look after it.
Related services
Other options to consider
Depending on your house, one of these may fit alongside or instead of central air.
Ductless Systems
Ductless HVAC in Westchester NY for additions, sunrooms, attics and homes without ducts. A licensed HVAC technician installs and repairs mini-splits.
Heat Pumps
Heat pump installation in Westchester NY for homes that want one system to heat and cool. A licensed HVAC technician checks the fit first. Contact us.
Duct Cleaning
Duct cleaning in Westchester NY plus ductwork repair, vent cleaning and new duct runs. A licensed HVAC technician inspects first and explains the fix.
Helpful guides
Quick checks before you call
AC Freezing Up
AC freezing up? Safe steps for a frozen coil or an iced-over air conditioner in Westchester NY, and when to call a licensed HVAC technician.
Service area
AC installation in White Plains and across Westchester County
From our base in White Plains we install and replace central air throughout Westchester County. We work in condos and townhouses in White Plains and New Rochelle, older homes in Eastchester and Pelham Manor that are adding cooling for the first time, and larger houses in Somers, Lewisboro and North Castle. Whatever the house, the process starts the same way: a visit, an honest assessment and a clear estimate. See the towns we serve.
Plan your new air conditioner
Tell us about your house and what you are hoping for. A licensed HVAC technician will visit, look things over and give you a clear estimate.
(914) 353-4574AC Installation FAQ
Common AC Installation Questions
Can you install central air in a house with radiators?
Often, yes. Cooling is handled by a separate air handler and ducts, usually placed in the attic, while the boiler and radiators keep heating the house. Your technician will check whether there is room to run ducts where they are needed.
How long does an AC installation take?
A straight replacement using existing ducts is usually much quicker than a new system in a house that has none. Your estimate will lay out what is involved so you know what to expect.
Do I need new ducts when I replace my air conditioner?
Not always. If your ducts are in good shape and sized correctly, they can often be reused. If they leak or are too small, your technician will explain what should change.
Is a heat pump an option instead of a regular AC?
It can be. A heat pump cools like an air conditioner and can also provide heat. Whether it fits depends on your home and your current heating system, and your technician can walk you through it.
Does a new system need a permit?
Some jobs require a permit, depending on where you live and the scope of the work. We will talk about it during the estimate so it is not a surprise.
More answers: heating and cooling FAQ
Contact us
