
Home / Services / No Heat or No Cooling
No Heat Repair in Westchester, NY, and No Cooling Too
A house with no heat in January or no air conditioning in a July heat wave gets uncomfortable fast. Before you call, a few safe checks can sometimes get things running. If they do not, a licensed HVAC technician can find out what stopped the system.
What to do first when you need no heat repair in Westchester NY
For no heat repair in Westchester NY, first confirm the thermostat is set to heat and above room temperature, the batteries are good, the breaker is on and the furnace or boiler power switch is on. In summer, check the same settings for cooling and look at the air filter. If the system still will not run, or you notice anything unsafe, stop and contact us so a technician can diagnose it.
What a technician looks at
How a no heat or no cooling call is diagnosed
Systems stop for many reasons, so the work starts with testing rather than guessing.
Confirm the call
Your technician checks that the thermostat is actually sending a signal and that the equipment has power.
Find where it stops
The startup sequence is followed step by step to see exactly which part fails to do its job.
Check safety devices
Switches that shut the system down for overheating, blocked venting or water problems are tested and the reason they tripped is found.
Explain and repair
You hear what failed and why, and the repair goes ahead once you approve it.

Safe checks
Heating not working or AC not working? Try these first
These checks do not require opening any equipment. Stop if anything looks or smells wrong.
- Thermostat in the right mode with the setpoint past room temperature
- Fresh thermostat batteries if the display is blank or dim
- Breakers for the furnace, boiler, air handler and outdoor unit on
- Furnace or boiler service switch in the on position
- Air filter clean, not clogged with dust
- Outdoor AC or heat pump unit clear of snow, ice or debris

No Heat or No Cooling
Safety first when the heat goes out
If you smell gas or a rotten-egg odor, leave the home right away with everyone inside, and call 911 or your gas utility from outside. Do not turn lights on or off, use a phone or start any appliance before you leave. Wait until the utility or fire department says it is safe before going back in or calling for heating repair.
Carbon monoxide has no smell, which is why working carbon monoxide alarms matter in any home with fuel-burning heat. If an alarm sounds, or people in the house feel headachy, dizzy or sick while the heat is running, get everyone outside and call 911. Do not restart the furnace or boiler until it has been checked.
Please do not open equipment panels, press reset buttons over and over, relight a pilot or touch gas valves. Repeated resets can hide the reason a safety device shut the system down, and that reason is exactly what your technician needs to find.
Good to know
No cooling repair in White Plains summers: when to call
If the thermostat, breaker and filter all check out and the system still will not run, it is time to contact us. The same goes if the outdoor unit hums but the fan does not spin, if you see ice on the refrigerant lines or indoor coil, or if water is leaking from the indoor unit. Turning the air conditioner off when you see ice protects the compressor while you wait for service.
In winter, call if the furnace or boiler tries to start and shuts off, if radiators or vents stay cold with the system running, or if you hear a new bang, squeal or grinding noise. Any time you notice a burning smell or see scorch marks near equipment, turn the system off at the thermostat and contact us rather than running it.
While you wait, keep the household as comfortable as you safely can. In cold weather, close doors to unused rooms and keep everyone in the warmest part of the house. In heat, close blinds on sunny windows and use fans. Never use a gas oven or outdoor heater to warm the house.
Related services
Related repair services
Depending on your equipment, these pages go into more detail.
Furnace Repair
Furnace repair in Westchester NY for furnaces that blow cold, will not light or keep shutting off. A licensed HVAC technician diagnoses it. Contact us.
AC Repair
AC repair in Westchester NY for central air that will not start, short-cycles, leaks or blows warm. A licensed HVAC technician finds the cause. Contact us.
Boilers and Radiators
Boiler repair in Westchester NY for cold radiators, baseboard heat problems, noises and leaks. A licensed HVAC technician diagnoses it. Contact us today.
Helpful guides
Quick checks before you call
Boiler Not Heating
Boiler not heating? Safe checks for cold radiators and baseboard heat in Westchester NY homes, and when to call a licensed HVAC technician.
AC Freezing Up
AC freezing up? Safe steps for a frozen coil or an iced-over air conditioner in Westchester NY, and when to call a licensed HVAC technician.
Service area
No heat and no cooling calls across Westchester County
Westchester HVAC Pros is based in White Plains and handles no heat and no cooling problems throughout Westchester County, whether it is a cold boiler in a Peekskill two-family house, a silent furnace in a Greenburgh split-level or an air conditioner that quit in a Sleepy Hollow or Buchanan home. Contact us with what you are seeing and we will let you know when a technician can come out. See the towns we serve.
Still no heat or no cooling?
If the safe checks did not solve it, contact us with what the system is doing. A licensed HVAC technician will diagnose and repair it.
(914) 353-4574No Heat or No Cooling FAQ
Common No Heat or No Cooling Questions
My furnace or boiler will not start. What should I check?
Confirm the thermostat is on heat and set above room temperature, replace the batteries, check the breaker and make sure the equipment’s service switch is on. If none of that helps, contact us. Do not open the equipment or try to relight anything.
Why is my AC running but not cooling?
A clogged filter, a dirty outdoor coil, a failed fan or a refrigerant problem can all cause this. Check the filter and make sure the outdoor unit is running and clear. If you see ice, turn the system off and contact us.
What should I do if I smell gas?
Leave the home immediately and call 911 or your gas utility from outside. Do not use switches, phones or appliances on the way out. Only return when you are told it is safe.
Is it safe to keep pressing the reset button?
No. A reset button or safety switch trips for a reason, and pressing it repeatedly can make the problem worse or hide it. Leave it alone and let a technician find the cause. If you already pressed it once and the system shut down again, mention that when you contact us, because it is a useful clue.
How soon can a technician come?
That depends on the schedule at the time you contact us. Tell us what is happening, what equipment you have and what you have already checked, and we will give you an honest answer about timing. Those details also help your technician come prepared.
More answers: heating and cooling FAQ
Contact us
