
Home / Services / Boilers and Radiators
Boiler Repair and Replacement in Westchester, NY
When the radiators stay cold or the baseboards barely warm up, the problem usually starts at the boiler or somewhere in the piping it feeds. A licensed HVAC technician from Westchester HVAC Pros finds the cause and tells you plainly whether a repair makes sense.
Boiler repair in Westchester NY: the short answer
For boiler repair in Westchester NY, a licensed HVAC technician checks the controls, the burner, the circulation of water or steam and the safety devices to find out why heat is not reaching your radiators or baseboard units. Many boilers can be repaired. If the boiler is old, leaking from the body itself or failing again and again, your technician will explain the case for replacement so you can decide.
How a boiler visit works
What happens when your technician arrives
A boiler call follows a simple order so nothing gets missed and you know where things stand at each step.
Hear the history
Your technician asks what you noticed, which rooms are cold, when it started and whether the boiler has been serviced lately.
Inspect and test
The boiler controls, burner operation, pressure or water level readings, pumps or valves that move heat, and the venting are checked.
Explain the findings
You get a plain explanation of what failed, what it means for the rest of the system, and your options.
Repair or plan
With your approval the repair goes ahead. If replacement is the smarter route, you get an estimate and a plan instead.

Warning signs
Signs your boiler needs a technician
Boilers tend to give hints before they quit. These are the ones worth a call, especially early in the heating season when a small problem is easier to sort out.
- Some radiators hot while others stay cold
- Baseboard heat that never gets more than lukewarm
- Banging, gurgling or knocking in the pipes or boiler
- Water pooling under the boiler or a radiator
- The boiler runs but the house never reaches the set temperature
- The boiler shuts off, restarts and shuts off again

Boilers and Radiators
Why radiators and baseboards go cold
A boiler heats the home by sending hot water or steam through pipes to radiators or baseboard units. When one room is cold and the rest are fine, the trouble is often in that part of the piping: a closed or stuck valve, trapped air, or a zone that is not being called. When every room is cold, the boiler itself, its controls or the thermostat are the usual suspects.
Noises tell a story too. Knocking in older radiator systems can point to water sitting where it should not, piping that has shifted over the years, or a boiler that is firing harder than it should. A steady gurgle can mean air in the lines. None of these can be confirmed from a description alone, so your technician tests the system before naming a cause.
Please leave the inside work to the technician. Releasing air, adding or draining water and adjusting boiler valves can scald you or damage the system if done wrong. What you can safely do is confirm the thermostat is set to heat and above room temperature, make sure the boiler power switch is on, and check that radiator valves in the cold rooms are open.
Good to know
Boiler replacement in White Plains and beyond: repair or replace?
There is no single age at which a boiler must go. Plenty of older units keep running well with steady care, while some newer ones have repeated trouble. The questions that matter are whether the boiler body itself is leaking or cracked, how often it has needed work, whether parts are still easy to get, and whether it keeps the house warm without constant attention.
If replacement is on the table, your technician looks at the size of your home, the radiators or baseboards you already have, and the piping and venting the new boiler will connect to. Many older Westchester houses were built around their radiators, so a replacement is usually planned to work with what is there rather than tear it out. Some jobs require a permit, and that is covered when the plan is laid out.
You will not be pushed toward a new boiler. If a repair is reasonable, that is what you will hear. If the boiler has reached the point where repairs no longer make sense, you will get a clear reason and an estimate so you can compare.
Related services
Related heating services
Boiler problems often overlap with these other services.
Seasonal Tune-Ups
HVAC tune-up in Westchester NY: AC checks in spring, furnace and boiler service in fall. A licensed HVAC technician inspects, cleans and tests. Book now.
Thermostats
Thermostat repair in Westchester NY and new thermostat installation matched to your wiring and equipment, done by a licensed HVAC technician. Contact us.
No Heat or No Cooling
No heat repair in Westchester NY, plus no cooling repair in summer. Safe checks to try first, then a licensed HVAC technician finds the cause. Contact us.
Helpful guides
Quick checks before you call
Boiler Not Heating
Boiler not heating? Safe checks for cold radiators and baseboard heat in Westchester NY homes, and when to call a licensed HVAC technician.
Service area
Boiler service across Westchester County
Boilers with radiators are common in the older homes and apartment buildings found all over Westchester County, from the two-family houses of Mount Vernon and Yonkers to the colonials and Tudors of Pelham, Larchmont and Hastings-on-Hudson. Westchester HVAC Pros is based in White Plains and handles boiler repair and replacement throughout the county, including river towns like Ossining and northern towns like Somers. See the towns we serve.
Cold radiators? Let’s find out why
Tell us what your boiler is doing and which rooms are cold. A licensed HVAC technician will diagnose it and explain your options.
(914) 353-4574Boilers and Radiators FAQ
Common Boilers and Radiators Questions
Why is only one radiator cold?
A single cold radiator usually points to that radiator or its piping rather than the boiler. Common causes include a closed valve, trapped air or a problem with that zone. Check that the valve is open, then let a technician find the rest.
Is a noisy boiler dangerous?
Not always, but noise means something has changed and should be checked. Banging, whistling or rumbling can come from the piping, water level or how the burner is firing. A technician needs to look at it to know which.
What should I do if I smell gas near the boiler?
Leave the home right away and call 911 or your gas utility from outside. Do not flip light switches, use phones or start anything inside before you go. Once the area is declared safe, call us to look at the boiler.
Do I need a carbon monoxide alarm with a boiler?
Yes, any home with fuel-burning heat should have working carbon monoxide alarms near sleeping areas and on each level. Test them regularly and replace batteries as recommended. If an alarm goes off, get everyone outside and call 911.
Can you work on baseboard heat as well as radiators?
Yes. Baseboard units and cast-iron radiators are both fed by the boiler, and your technician works on the whole system, from the boiler to the piping and the units in each room. Baseboard covers that are bent or blocked by furniture can also cut heat output, so those get a look as well.
More answers: heating and cooling FAQ
Contact us
